Stains

Water-based pigment stain and oil-based gel stain for adding even color to interior wood. Both are for interior use.

About Wood Stains

Pigment stains and gel stains both add color to interior wood. Each suits different surfaces and woods.

General Finishes water-based pigment stain is a penetrating stain that soaks into the wood fibers, providing even color while allowing the grain to remain visible. Its water-based formula dries quickly, cleans up with soap and water, and can be applied by brush, roller, spray or pad. It can also be mixed with General Finishes water-based topcoats to create a toner. On blotch-prone woods such as pine, a pre-stain conditioner can help promote more uniform absorption and may also be used to dilute the stain. It is compatible with all General Finishes topcoats.

General Finishes gel stain is a heavy-bodied oil-based stain that remains close to the surface rather than penetrating. Applied with a brush, roller or cloth, it offers excellent control on vertical surfaces, moldings and woods prone to uneven absorption. Its high pigment concentration produces rich, semi-opaque color, and the urethane binder allows it to be used as a glaze or semi-gloss topcoat. It is compatible with all General Finishes varnishes but must cure for at least 72 hours before a water-based finish is applied.

For clear, transparent color, see our dyes. Protect stained wood with a varnish or lacquer.