• Produces symmetrical tenon with 60° tapered shoulder that fits neatly in countersunk socket
    • Main blade shapes tenon and shoulder; finishing blade smoothes tenon to consistent diameter and cuts slight relief at base of shoulder to ensure it seats flush
    • Finishing blade's cutting depth is adjustable; can fine-tune tenon diameter for close fit
    • Cutting capacity for all sizes is 1-1/2" greater than tenon diameter
    • Sizes 5/8" to 1" cut 2" long tenons (not including tapered shoulder) and are for use in drills with 3/8" or larger chuck; sizes 1-1/4" to 2" cut 3" tenons and are for use in drills with 1/2" or larger chuck
    • All have hex shanks and anodized bodies and can be used in electric drill or hand brace (not for use in drill press)
    • Two sizes for countersinks, each with interchangeable bushings sized to match our tenon cutters
    • Small countersink comes with 5/8", 3/4", 7/8" and 1" bushings; large comes with 1-1/4", 1-1/2", 1-3/4" and 2" bushings
    • Made in Canada
    • Patented
Veritas Power Tapered Tenon Cutters, 5/8 inch  - 2 inches diameters
Product # Description
05J46.02 Veritas® Tapered Tenon Cutter, 5/8"
05J46.04 Veritas® Tapered Tenon Cutter, 3/4"
05J46.06 Veritas® Tapered Tenon Cutter, 7/8"
05J46.08 Veritas® Tapered Tenon Cutter, 1"
05J46.10 Veritas® Tapered Tenon Cutter, 1-1/4"
05J46.12 Veritas® Tapered Tenon Cutter, 1-1/2"
05J46.14 Veritas® Tapered Tenon Cutter, 1-3/4"
05J46.16 Veritas® Tapered Tenon Cutter, 2"
05J46.50 Small Countersink with 5/8" to 1" Bushings
05J46.53 Large Countersink with 1-1/4" to 2" Bushings
05J46.30 Replacement Blade, 5/8" to 1" Cutters
05J46.32 Replacement Blade, 1-1/4" to 2" Cutters
05J46.34 Replacement Finishing Blade