Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologo
Marking wood with a pencil along the edge of a Veritas edge rule set flush with the end of the stock
Marking wood with a pencil set against the edge of a Veritas edge rule saddling a workpiece corner
A Veritas edge rule saddling a workpiece corner, with its end set flush with the end of the stock
A Veritas edge rule saddling the corner of a workpiece, with its end flush to the end of the stock
Using a pencil and a Veritas edge rule to mark a piece of wooden stock
Using a pencil to mark a dowel registered in the inside corner of a Veritas edge rule
Marking the middle of a wooden panel with a pencil and a Veritas edge rule set on top of the panel
05N4661 - 150mm Veritas Edge Rule
05N4662 - 300mm Veritas Edge Rule
05N4663 - 450mm Veritas Edge Rule

Veritas Metric Edge Rules

Veritas Metric Edge RulesMade in Canada

Length:

Dealer Information

  • The great advantage of this style of rule is that it saddles the edge of a workpiece, making it easy to hold accurately in position when measuring and marking layout lines
  • Ours have an acute interior angle to ensure that they seat well, even over saw whiskers, and bevelled edges with etched graduations to minimize parallax errors
  • This design also simplifies transfer of perpendicular lines from face to edge, and is particularly convenient when holding and marking off dowel rod stock
  • The wide leg on the L-shaped cross-section is for face work, while the shorter leg is for narrow stock and edge work
  • Available in 150mm, 300mm and 450mm lengths
  • The smaller rules have faces with depths of 3/4" and 3/8"; the 450mm rule has face depths of 1" and 7/16"
  • You can also use the rules on a flat surface – and, since the shape makes them much easier to pick up than a flat rule, you may find yourself reaching for them as your go-to rules
  • The 150mm rule is small enough to fit comfortably in a pocket
  • Made in Canada from aluminum with a black anodized finish
Marking wood with a pencil along the edge of a Veritas edge rule set flush with the end of the stock

Options:

Length

Variations:

  • 05N4661 - 150mm Veritas Edge Rule
    1 - $14.50
  • 05N4662 - 300mm Veritas Edge Rule
    1 - $21.50
  • 05N4663 - 450mm Veritas Edge Rule
    1 - $28.50

Veritas Metric Edge Rules

  • The great advantage of this style of rule is that it saddles the edge of a workpiece, making it easy to hold accurately in position when measuring and marking layout lines
  • Ours have an acute interior angle to ensure that they seat well, even over saw whiskers, and bevelled edges with etched graduations to minimize parallax errors
  • This design also simplifies transfer of perpendicular lines from face to edge, and is particularly convenient when holding and marking off dowel rod stock
  • The wide leg on the L-shaped cross-section is for face work, while the shorter leg is for narrow stock and edge work
  • Available in 150mm, 300mm and 450mm lengths
  • The smaller rules have faces with depths of 3/4" and 3/8"; the 450mm rule has face depths of 1" and 7/16"
  • You can also use the rules on a flat surface – and, since the shape makes them much easier to pick up than a flat rule, you may find yourself reaching for them as your go-to rules
  • The 150mm rule is small enough to fit comfortably in a pocket
  • Made in Canada from aluminum with a black anodized finish