Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologo
Using a pencil and a 1 metre shop rule to mark a plywood panel
Using a pencil and a shop rule to mark a cut line on a sheet of plywood
A close-up end view of a Veritas shop rule, showing a cross section of the aluminum extrusion
Using the left-to-right scale of a shop rule to measure from the left edge of a panel
Using a pencil and a Veritas shop rule to mark a piece of wooden stock
Using a pencil and a Veritas shop rule to mark a piece of wooden stock
05N0426 - Veritas 1m Shop Rule
Using a pencil and a 1 metre shop rule to mark a plywood panel
Using a pencil and a shop rule to mark a cut line on a sheet of plywood
A close-up end view of a Veritas shop rule, showing a cross section of the aluminum extrusion
Using the left-to-right scale of a shop rule to measure from the left edge of a panel
Using a pencil and a Veritas shop rule to mark a piece of wooden stock
Using a pencil and a Veritas shop rule to mark a piece of wooden stock
05N0426 - Veritas 1m Shop Rule

Veritas 1m Shop RuleMade in Canada

Dealer Information

  • Cut from a 2 1/2" wide solid aluminum extrusion
  • Fine laser-etched markings stand out clearly against the matte black anodized finish
  • Graduated in millimetres; one edge reads right to left and the other left to right
  • Tapered edges lie within 0.010" of the stock surface to avoid parallax errors that can occur when marking
  • “Feet” set back from each edge provide a clearance to ensure markings will not be smudged by the rule, and that the rule registers close to each edge
  • Broad profile makes it easy to plant a hand comfortably
  • Protruding ribs ensure a slip-free mechanical lock
  • Butts nicely against a fence for setting blade offsets, and is wide enough to provide a vertical register in use
  • Made in Canada
Using a pencil and a 1 metre shop rule to mark a plywood panel

Options:

Variations:

  • 05N0426 - Veritas 1m Shop Rule
    1 - $58.50

Veritas 1m Shop Rule

  • Cut from a 2 1/2" wide solid aluminum extrusion
  • Fine laser-etched markings stand out clearly against the matte black anodized finish
  • Graduated in millimetres; one edge reads right to left and the other left to right
  • Tapered edges lie within 0.010" of the stock surface to avoid parallax errors that can occur when marking
  • “Feet” set back from each edge provide a clearance to ensure markings will not be smudged by the rule, and that the rule registers close to each edge
  • Broad profile makes it easy to plant a hand comfortably
  • Protruding ribs ensure a slip-free mechanical lock
  • Butts nicely against a fence for setting blade offsets, and is wide enough to provide a vertical register in use
  • Made in Canada