Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologo
05P3402 - 2 1/4" A2 Blade, 25° Bevel
05P3403 - 2 1/4" A2 Blade, 38° Bevel
05P3404 - 2 1/4" A2 Blade, 50° Bevel

05P3402 - 2 1/4" A2 Blade, 25° Bevel

Veritas A2 Bevel-Up Bench Plane Blades

(0 Reviews)

Option:

Dealer Information

  • Lapped replacement and optional blades in A2, O1 or PM-V11 tool steel for our bevel-up jointer, jack and smoother planes
  • The 25° blade is the best choice for all end-grain work, including shooting; the resulting 37° cutting angle effectively severs end-grain fibers and minimizes tearing
  • The 25° blade is also capable of general smoothing, but is susceptible to tear-out in all but the most well-behaved grain
  • The 38° blade yields an effective cutting angle of 50° (commonly known as a York pitch) and is excellent for general smoothing; higher cutting angles require greater force to push the plane, making the 38° bevel the ideal starting point (a balance of performance and effort) when working difficult wood
  • The 50° blade is for smoothing woods with widely varying or reversing grain (e.g., bird’s-eye maple) where tear-out is difficult to control; the resulting cutting angle of 62° produces what is known as a Type II chip (or shaving), one created by wood failure right at the cutting edge, eliminating tear-out on even the most difficult grains
  • Planing wood at this cutting angle is quite a workout – but the results are well worth it
  • All blades are 2 1/4" wide
05P3402 - 2 1/4" A2 Blade, 25° Bevel

Options:

Option

Variations:

  • 05P3402 - 2 1/4" A2 Blade, 25° Bevel
    1 - $49.50
  • 05P3403 - 2 1/4" A2 Blade, 38° Bevel
    1 - $49.50
  • 05P3404 - 2 1/4" A2 Blade, 50° Bevel
    1 - $49.50

Veritas A2 Bevel-Up Bench Plane Blades

  • Lapped replacement and optional blades in A2, O1 or PM-V11 tool steel for our bevel-up jointer, jack and smoother planes
  • The 25° blade is the best choice for all end-grain work, including shooting; the resulting 37° cutting angle effectively severs end-grain fibers and minimizes tearing
  • The 25° blade is also capable of general smoothing, but is susceptible to tear-out in all but the most well-behaved grain
  • The 38° blade yields an effective cutting angle of 50° (commonly known as a York pitch) and is excellent for general smoothing; higher cutting angles require greater force to push the plane, making the 38° bevel the ideal starting point (a balance of performance and effort) when working difficult wood
  • The 50° blade is for smoothing woods with widely varying or reversing grain (e.g., bird’s-eye maple) where tear-out is difficult to control; the resulting cutting angle of 62° produces what is known as a Type II chip (or shaving), one created by wood failure right at the cutting edge, eliminating tear-out on even the most difficult grains
  • Planing wood at this cutting angle is quite a workout – but the results are well worth it
  • All blades are 2 1/4" wide