Description
- 6-3/8" long and 2" wide; body made of ductile cast iron
- Combined blade advance and lateral adjust is sensitive and accurate
- Two blade guide screws prevent shifting of blade
- Adjustable nosepiece does not extend beyond body; can't accidentally be driven back into a sharp blade
- Wide wings, multiple finger grips and accurately machined 90° angle between the sole and the sides make plane ideal for shooting
- 12° bed angle of plane and 25° bevel angle of blade combine to result in a 37° cutting angle
- Blade is 1-5/8" wide, 1/8" thick, made of either A2 or O1 tool steel and lapped on non-bevel side to flatness tolerance of 0.0002" or better over the working surface; average roughness surface finish of 5 microinches (0.000005") or better
- Can be used with optional ball tail and front knob to convert plane to a low-angle smoothing plane, albeit smaller
- Optional toothed A2 steel blade with 38° bevel available
| Product # | Description |
| 05P22.01 | Veritas® Low-Angle Block Plane, A2 Steel Blade |
| 05P22.51 | Veritas® Low-Angle Block Plane, O1 Steel Blade |
| 05P22.71 | Veritas® Low-Angle Block Plane, PMV-11® Steel Blade |
| Accesories | |
| 05P22.02 | Replacement A2 Blade, 1-5/8", 25° Bevel |
| 05P22.52 | Replacement O1 Blade, 1-5/8", 25° Bevel |
| 05P22.72 | Replacement PMV-11® Blade, 1-5/8", 25° Bevel |
| 05P22.07 | Optional A2 Blade, 1-5/8", 38° Bevel |
| 05P22.57 | Optional O1 Blade, 1-5/8", 38° Bevel |
| 05P22.77 | Optional PMV-11® Blade, 1-5/8", 38° Bevel |
| 05P22.08 | Optional A2 Blade, 1-5/8", 50° Bevel |
| 05P22.58 | Optional O1 Blade, 1-5/8", 50° Bevel |
| 05P22.78 | Optional PMV-11® Blade, 1-5/8", 50° Bevel |
| A. 05P22.06 | Optional Toothed A2 Blade, 1-5/8", 38° bevel |
| B. 05P22.04 | Veritas® Tall Front Knob |
| C. 05P22.03 | Veritas® Ball Tail |
| 05P22.05 | Veritas® Ball Tail & Knob Set |
| D. 05P22.10 | Veritas® Chamfer Guide |