Option:
For an "S" bend you need a transition device to let you strap opposite sides of the wood. Similarly, for change-of-plane bends, you need to strap adjacent surfaces. For use only with 2" straps (not included).
Both units require two straps – either cut the 10' strap (leaves 8' bending blank capacity) or purchase a second strap.
Made in Canada.
Veritas bend units come in two types: the S-bend unit wraps a strap around opposite faces of the workpiece for a reversing curve, while the change-of-plane unit wraps adjacent faces for a bend that shifts direction; choose the S-bend unit for double curves and the change-of-plane unit for angled transitions.
No, both units are designed for 2" strap clamp material, which is available separately or can be cut from an existing 10' strap.
Each bend unit needs two straps to complete its wrap, so plan on either two separate straps or one 10' strap cut in two, which leaves about 8' of bending blank capacity.
| Compatibility | Fits 2" strap clamp material only; requires two straps per bend unit |
| Includes | Bend unit |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Option
Variations:
Veritas Bend Units
For an "S" bend you need a transition device to let you strap opposite sides of the wood. Similarly, for change-of-plane bends, you need to strap adjacent surfaces. For use only with 2" straps (not included).
Both units require two straps – either cut the 10' strap (leaves 8' bending blank capacity) or purchase a second strap.
Made in Canada.