Developed for use with a router table, this joinery jig lets you accurately cut dovetails and box joints in stock up to 15 1/2" wide
It produces through dovetails with pins spaced on 1 1/2" centers and box joints with 3/32", 3/16", 3/8" or 3/4" fingers in stock from 1/8" to 1" thick
Half-blind dovetails can be cut in material from 1/2" to 1" thick
With an optional guide bushing (sold separately) and a 0.313" straight cutter, you can also cut through dovetails with a 3/4" pin spacing
Optional and included bushings each fit table openings with a 1 3/16" through bore and a 1 3/8" counterbore
Made largely of anodized aluminum, the jig has a two-piece design that uses an extruded beam to hold the stock perpendicular to a CNC-machined template
Adjustable side stops allow repeatable positioning, and have an offset for registering a rabbeted drawer front
Fast-acting cam clamps reliably hold the work against a non-marring textured clamping surface
An eccentric guide bushing lets you accurately change the distance between the cutter and template, eliminating the need to fine tune jig position for joint fit
When cutting 3/4" box joints or through tails spaced 1 1/2" on center, you can use the included filler blocks to occupy the template recesses not being used
Interchangeable instruction cards provide an overview of the set-up required for each joint, and slip into a channel in the top of the beam for quick reference
Compatible with 1/2" routers, it comes with everything needed to get started: 8° and 14° 1/2" dovetail cutters plus 1/2" × 1 1/4" and 3/8" x 1" straight cutters (all with 1/2" shanks), an eccentric guide bushing, a router bit height gauge, ten filler blocks, five instruction cards and a 76-page manual
Made in Canada
Not available for shipment to Québec
Options:
Variations:
17N1295 - Leigh Router Table Jig 1 - $599.00
Leigh RTJ400 Router Table Joinery Jig
Developed for use with a router table, this joinery jig lets you accurately cut dovetails and box joints in stock up to 15 1/2" wide
It produces through dovetails with pins spaced on 1 1/2" centers and box joints with 3/32", 3/16", 3/8" or 3/4" fingers in stock from 1/8" to 1" thick
Half-blind dovetails can be cut in material from 1/2" to 1" thick
With an optional guide bushing (sold separately) and a 0.313" straight cutter, you can also cut through dovetails with a 3/4" pin spacing
Optional and included bushings each fit table openings with a 1 3/16" through bore and a 1 3/8" counterbore
Made largely of anodized aluminum, the jig has a two-piece design that uses an extruded beam to hold the stock perpendicular to a CNC-machined template
Adjustable side stops allow repeatable positioning, and have an offset for registering a rabbeted drawer front
Fast-acting cam clamps reliably hold the work against a non-marring textured clamping surface
An eccentric guide bushing lets you accurately change the distance between the cutter and template, eliminating the need to fine tune jig position for joint fit
When cutting 3/4" box joints or through tails spaced 1 1/2" on center, you can use the included filler blocks to occupy the template recesses not being used
Interchangeable instruction cards provide an overview of the set-up required for each joint, and slip into a channel in the top of the beam for quick reference
Compatible with 1/2" routers, it comes with everything needed to get started: 8° and 14° 1/2" dovetail cutters plus 1/2" × 1 1/4" and 3/8" x 1" straight cutters (all with 1/2" shanks), an eccentric guide bushing, a router bit height gauge, ten filler blocks, five instruction cards and a 76-page manual
