Your browser is out of date and some parts of this website may not work correctly. Please update to the latest version of Chrome, Edge, Firefox, or Safari.
Best used on any surface prepared by sanding to 220x or more and sealed by a penetrating oil finish (tung oil sealer is ideal)
Using the all-linen buff and tripoli bar, perform the initial buffing
Follow this with the white diamond bar on the combination linen/flannel buff to further refine and polish the finish, then complete the process with carnauba wax and the all-flannel buff
The resulting finish is close to a multi-coat lacquer in appearance, yet it is achieved in minutes
Although scratches are removed, crisp detail is not softened
The system includes the 3 buffs (8" to 9" in diameter) with arbors, one tripoli bar, one diamond bar, one carnauba bar, and a quick-change adapter that fits a 1/2" or 5/8" motor shaft (adapter sleeve included)
Recommended minimum 1725 rpm
If your motor is 3000 rpm or more, we recommend the 4" system
A 5/8" diameter mandrel with #1 or #2 Morse taper specifically for using the Beall system on a lathe is available separately
Made in USA
Options:
Variations:
The 8" Beall Buffing System
A fast and effective method of finishing wood
Best used on any surface prepared by sanding to 220x or more and sealed by a penetrating oil finish (tung oil sealer is ideal)
Using the all-linen buff and tripoli bar, perform the initial buffing
Follow this with the white diamond bar on the combination linen/flannel buff to further refine and polish the finish, then complete the process with carnauba wax and the all-flannel buff
The resulting finish is close to a multi-coat lacquer in appearance, yet it is achieved in minutes
Although scratches are removed, crisp detail is not softened
The system includes the 3 buffs (8" to 9" in diameter) with arbors, one tripoli bar, one diamond bar, one carnauba bar, and a quick-change adapter that fits a 1/2" or 5/8" motor shaft (adapter sleeve included)
Recommended minimum 1725 rpm
If your motor is 3000 rpm or more, we recommend the 4" system
A 5/8" diameter mandrel with #1 or #2 Morse taper specifically for using the Beall system on a lathe is available separately
