• The key to consistent and fast honing is repeatability – and the Mk.II honing guide delivers it in spades
    • Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying about controlling blade angle at the same time; this makes your honing reliable, accurate and consistent
    • The deluxe honing guide set includes standard and narrow-blade clamping heads as well as an angle registration jig, a straight roller base and a camber roller base
    • The standard head uses a clamping bar that registers on the face of the blade
    • Accepts flat and tapered blades between 1/2" and 2 7/8" wide and up to 15/32" thick, including skew blades
    • Hones bevel angles from 15° to 54° and back bevels from 10° to 20°
    • The narrow-blade head clamps blades from the sides with parallel jaws to ensure they stay square to the jig
    • The jaws are also canted to keep blades centered and tight to the reference face of the jig, whether they have bevelled or square edges – it will even hold chisels that are triangular in cross section
    • Accepts blades from 1/8" to 1 1/2" wide, holding bevel-edged chisels up to 15/32" thick and square-edged blades up to 11/32" thick
    • Hones bevel angles from 15° to 40° and back bevels from 10° to 20°
    • Offering an impressive range of angle settings, the integral blade angle registration jig squares the blade and sets the bevel angle in one easy step
    • A scale and sighting mark help center blades when using the standard head; the narrow-blade head is self-centering
    • Once the blade is clamped, the jig slides off the guide
    • The interchangeable rollers attach to the clamping heads with a single thumbscrew
    • The eccentric axle mount lets you add a micro-bevel to any angle setting with a simple turn of a knob
    • The straight roller hones straight edges
    • At 2" wide, it provides a stable base for even the narrowest of blades
    • The barrel-shaped camber roller lets you rock the guide slightly to hone a slight curve or camber into a blade edge, eliminating blade tracks when planing
    • The completely predictable results this set offers for a wide variety of blades makes it useful in the shop of any woodworker who works with hand tools
    • Made in Canada
    • Patented
    • The optional Veritas Skew Registration Jig is offered separately
Includes standard and narrow-blade clamping heads, angle registration jig, and  straight  & camber roller.
Product # Description
05M09.01 Veritas® Mk.II Honing Guide
05M09.10 Veritas® Mk.II Narrow-Blade Honing Guide
05M09.20 Veritas® Mk.II Deluxe Honing Guide Set
05M09.03 Veritas® Skew Registration Jig
05M09.05 Veritas® Camber Roller
05M09.09 Veritas® Narrow-Blade Head Only