Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologo
Sharpening a chisel using the tool holder
MK.II system used free hand for carving a V-tool
MK.II system used free hand for carving a gouge
05M3101 - Veritas Mk.II Power Sharpening System
Blade holder and blade setting jig holding a chisel
Positive-position detent settings on the tool rest post of the Mk.II power sharpening system
Protective dust cover for Veritas Mk.II Power Sharpening System
05M3101 - Veritas Mk.II Power Sharpening System

05M3101 - Veritas Mk.II Power Sharpening System

Veritas Mk.II Power Sharpening SystemMade in Canada

Item 05M3101, Veritas Mk.II Power Sharpening System

Dealer Information

Veritas Innovation in tools
Shop Our Complete Line of Veritas Tools
  • Modern abrasives combined with stable, flat 650 rpm turntable
  • Accurately set tool rest to sharpen any straight-edged tool at bevel angle from 15° to 45° (in 5° increments)
  • Tool rest post has positive-position detent settings at 5° intervals
  • Included blade holder and blade-setting jig ensure blade squareness and accurate blade projection
  • Additional tool holders available
  • Quick-change turntable platters made from sandwich aluminum with inert core; stable and flat base for 8" diameter adhesive-backed discs, available in grit sizes 80x to 1200x
  • Includes two platters and four abrasive discs: 80x and 150x for thick platter, 320x and 1200x for thin platter
  • Change from coarse to fine discs automatically gives 1° angle increase to create micro bevels
  • Discs of different materials may be mounted using spray adhesives
  • Turntable mounted in single large double-row ball bearing to ensure rigid location and smooth operation
  • Driven by V-belt from vertically mounted, fully sealed 1/4 hp motor
  • Operates at 60dB
  • Motor and turntable mounted to precision-machined, cast aluminum chassis to ensure proper drive belt alignment
  • Nylon dust cover included
  • Equipped with integral thermal overload protection; certified to meet CSA and UL requirements; compatible for use in North America only
  • Five year limited warranty, two-year warranty on electrical components
  • Weighs 23 lb
  • Patented
    • Product #Description
    05M31.01Veritas® Mk.II Power Sharpening System
    05M30.158" Zirconia Disc, 80x *
    05M30.168" Zirconia Disc, 120x
    05M30.208" Aluminum Oxide Disc, 150x *
    05M30.218" Aluminum Oxide Disc, 220x
    05M30.228" Aluminum Oxide Disc, 320x *
    05M30.238" Aluminum Oxide Disc, 500x
    05M30.248" Aluminum Oxide Disc, 1200x *
    *Discs included with sharpening system.
    Accessories
    05M30.43Extra Tool Holder
    05M30.11Extra 4mm Platter
    05M30.10Extra 3mm Platter
Sharpening a chisel using the tool holder

Options:

Variations:

  • 05M3101 - Veritas Mk.II Power Sharpening System
    1 - $599.00

Veritas Mk.II Power Sharpening System

  • Modern abrasives combined with stable, flat 650 rpm turntable
  • Accurately set tool rest to sharpen any straight-edged tool at bevel angle from 15° to 45° (in 5° increments)
  • Tool rest post has positive-position detent settings at 5° intervals
  • Included blade holder and blade-setting jig ensure blade squareness and accurate blade projection
  • Additional tool holders available
  • Quick-change turntable platters made from sandwich aluminum with inert core; stable and flat base for 8" diameter adhesive-backed discs, available in grit sizes 80x to 1200x
  • Includes two platters and four abrasive discs: 80x and 150x for thick platter, 320x and 1200x for thin platter
  • Change from coarse to fine discs automatically gives 1° angle increase to create micro bevels
  • Discs of different materials may be mounted using spray adhesives
  • Turntable mounted in single large double-row ball bearing to ensure rigid location and smooth operation
  • Driven by V-belt from vertically mounted, fully sealed 1/4 hp motor
  • Operates at 60dB
  • Motor and turntable mounted to precision-machined, cast aluminum chassis to ensure proper drive belt alignment
  • Nylon dust cover included
  • Equipped with integral thermal overload protection; certified to meet CSA and UL requirements; compatible for use in North America only
  • Five year limited warranty, two-year warranty on electrical components
  • Weighs 23 lb
  • Patented
    • Product #Description
    05M31.01Veritas® Mk.II Power Sharpening System
    05M30.158" Zirconia Disc, 80x *
    05M30.168" Zirconia Disc, 120x
    05M30.208" Aluminum Oxide Disc, 150x *
    05M30.218" Aluminum Oxide Disc, 220x
    05M30.228" Aluminum Oxide Disc, 320x *
    05M30.238" Aluminum Oxide Disc, 500x
    05M30.248" Aluminum Oxide Disc, 1200x *
    *Discs included with sharpening system.
    Accessories
    05M30.43Extra Tool Holder
    05M30.11Extra 4mm Platter
    05M30.10Extra 3mm Platter