05M3015 - 8" Zirconia Disc, 80x

Replacement/Extra 8" Discs for Veritas Mk.II Power Sharpening System

Grit:

Dealer Information

Modern abrasives combined with stable, flat 650 rpm turntable
Accurately set tool rest to sharpen any straight-edged tool at bevel angle from 15° to 45° (in 5° increments)
Tool rest post has positive-position detent settings at 5° intervals
Included blade holder and blade-setting jig ensure blade squareness and accurate blade projection
Additional tool holders available
Quick-change turntable platters made from sandwich aluminum with inert core; stable and flat base for 8" diameter adhesive-backed discs, available in grit sizes 80x to 1200x
Includes two platters and four abrasive discs: 80x and 150x for thick platter, 320x and 1200x for thin platter
Change from coarse to fine discs automatically gives 1° angle increase to create micro bevels
Discs of different materials may be mounted using spray adhesives
Turntable mounted in single large double-row ball bearing to ensure rigid location and smooth operation
Driven by V-belt from vertically mounted, fully sealed 1/4 hp motor
Operates at 60dB
Motor and turntable mounted to precision-machined, cast aluminum chassis to ensure proper drive belt alignment
Nylon dust cover included
Equipped with integral thermal overload protection; certified to meet CSA and UL requirements; compatible for use in North America only
Five year limited warranty, two-year warranty on electrical components
Weighs 23 lb
Patented

Product #	Description
05M31.01	Veritas® Mk.II Power Sharpening System
05M30.15	8" Zirconia Disc, 80x *
05M30.16	8" Zirconia Disc, 120x
05M30.20	8" Aluminum Oxide Disc, 150x *
05M30.21	8" Aluminum Oxide Disc, 220x
05M30.22	8" Aluminum Oxide Disc, 320x *
05M30.23	8" Aluminum Oxide Disc, 500x
05M30.24	8" Aluminum Oxide Disc, 1200x *
	*Discs included with sharpening system.
	Accessories
05M30.43	Extra Tool Holder
05M30.11	Extra 4mm Platter
05M30.10	Extra 3mm Platter

Options:

Grit

Variations:

Replacement/Extra 8" Discs for Veritas Mk.II Power Sharpening System

Modern abrasives combined with stable, flat 650 rpm turntable
Accurately set tool rest to sharpen any straight-edged tool at bevel angle from 15° to 45° (in 5° increments)
Tool rest post has positive-position detent settings at 5° intervals
Included blade holder and blade-setting jig ensure blade squareness and accurate blade projection
Additional tool holders available
Quick-change turntable platters made from sandwich aluminum with inert core; stable and flat base for 8" diameter adhesive-backed discs, available in grit sizes 80x to 1200x
Includes two platters and four abrasive discs: 80x and 150x for thick platter, 320x and 1200x for thin platter
Change from coarse to fine discs automatically gives 1° angle increase to create micro bevels
Discs of different materials may be mounted using spray adhesives
Turntable mounted in single large double-row ball bearing to ensure rigid location and smooth operation
Driven by V-belt from vertically mounted, fully sealed 1/4 hp motor
Operates at 60dB
Motor and turntable mounted to precision-machined, cast aluminum chassis to ensure proper drive belt alignment
Nylon dust cover included
Equipped with integral thermal overload protection; certified to meet CSA and UL requirements; compatible for use in North America only
Five year limited warranty, two-year warranty on electrical components
Weighs 23 lb
Patented

Product #	Description
05M31.01	Veritas® Mk.II Power Sharpening System
05M30.15	8" Zirconia Disc, 80x *
05M30.16	8" Zirconia Disc, 120x
05M30.20	8" Aluminum Oxide Disc, 150x *
05M30.21	8" Aluminum Oxide Disc, 220x
05M30.22	8" Aluminum Oxide Disc, 320x *
05M30.23	8" Aluminum Oxide Disc, 500x
05M30.24	8" Aluminum Oxide Disc, 1200x *
	*Discs included with sharpening system.
	Accessories
05M30.43	Extra Tool Holder
05M30.11	Extra 4mm Platter
05M30.10	Extra 3mm Platter