Q: What size dog-hole spacing does this vise work with?
It works with dog-hole spacing up to 7 3/4" apart, since the jaw has two mounting positions 3 7/8" apart on the vise body.
Two-position removable jaw
| Product # | Description |
| 05G31.01 | Veritas® Inset Vise |
| 05G31.03 | Optional Pivoting Jaw |
It works with dog-hole spacing up to 7 3/4" apart, since the jaw has two mounting positions 3 7/8" apart on the vise body.
This inset vise requires a work surface at least 1 1/4" thick to accept its cavity; thinner benches need reinforcing to keep the mounting area strong.
Yes, you'll need to rout or chisel a stepped cavity into the benchtop so the vise body and its flush-mount wings seat properly; full dimensions come with the vise.
Not much. Periodically clear debris from the open ends of the vise and add a little lubrication to the main screw if it starts to turn stiffly.
Yes, the jaw face has a keyway that accepts a #10 nut, so shop-built jaws can be bolted on in place of the stock jaw.
| Materials | Machined steel castings; anodized aluminum extrusions |
| Dimensions | 10 3/4" long × 3" wide × 29/32" deep overall; jaw 1/2" tall × 1 3/16" wide; 4" jaw travel |
| Compatibility | Adjustable to dog-hole spacing up to 7 3/4"; accepts shop-built jaws via #10 nut keyway; installs in work surfaces at least 1 1/4" thick |
| Includes | Inset vise; six #8 × 1" flat-head mounting screws; installation instructions |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Veritas Inset Vise
| Product # | Description |
| 05G31.01 | Veritas® Inset Vise |
| 05G31.03 | Optional Pivoting Jaw |